QUICK TIP: DHCP stands for Dynamic Host Configuration Protocol. This option usually applies to Cable connections. Keep the default only if your ISP supports DHCP or if you connect using a dynamic IP address. Automatic Configuration – DHCP - The default Internet Connection Type is Automatic Configuration – DHCP.If your network requires Ethernet mode as the configuration setup, complete the following steps: If you are using PPPoA, your IP address is provided automatically.Įnter the IP settings for your local network in the Network Setup section. RFC 2364 PPPoA - Some DSL-based ISPs use Point-to-Point Protocol over ATM (PPPoA) to establish Internet connections.If you are using PPPoE, your IP address is provided automatically. RFC 2516 PPPoE - Some DSL-based ISPs use Point-to-Point Protocol over Ethernet (PPPoE) to establish Internet connections.IPoA - IPoA (IP over ATM) uses a fixed IP address.RFC 2684 Routed - With this method, you are required to use a permanent IP address to connect to the Internet.Otherwise, select Use the following IP address. Select Automatically obtain an IP address if your ISP allocates an IP address upon connection. RFC 2684 Bridged - If selected, enter the correct data for the IP Settings.If selected, you only need to enter the VC Settings. Bridged Mode Only - In this mode, only the DSL modem function is available, and all gateway features are disabled.QUICK TIP: This information will be provided by your Internet Service Provider (ISP). Select an Internet Connection Type, and enter the necessary information below. The language of the web-based setup page will change five (5) seconds after you select another language.

Click on the drop-down menu and choose from the list. If your network requires ADSL mode as the configuration setup, complete the following steps:Īccess the X-series modem-router’s web-based setup page.

NOTE: Images may vary depending on your modem-router model. The X-series modem-routers are capable of having either of the two (2) configuration settings depending on the setup applicable to your network. The Basic Setup screen of the X-series modem-routers allows you to change its general settings.

Basic router configuration